First Brick / PC full game
Make and place your first clay brick
Press 2 for the Clay Bowl and scoop clay from a riverbank clay pile with the left mouse button (LMB). Pour it into a starter mold, dry it, then press 1 for your hands and use LMB to collect the ready brick. Carry it to a highlighted space on the pyramid’s current layer and use LMB to place it.
Updated 2026-11-16 · PC full game
Follow the steps
Scoop clay at the river
Press 2 to take out the Clay Bowl. Walk to a visible clay pile beside the Nile, aim at the pile and use LMB to scoop. The basic starter mold needs 600 g. If the game says “Needs clay — scoop it at the river,” your bowl needs clay before you return to the mold.
Open full-size image ↗Look for the low brown clay piles along the water. Select the bowl with 2, then aim at a pile and left-click to scoop. Fill a starter mold
Keep the clay-filled bowl selected, aim at one of the existing Clay Molds and use LMB to pour. Supply its 600 g requirement until the mold changes to Drying. You can use the starter equipment for this first brick.
Dry the clay
Aim at the filled mold and hold the right mouse button (RMB) to blow on it and speed drying. Watch its progress until the tooltip says “Ready · 1 brick.” A glowing ready brick is the collection target.
Collect the brick with your hands
Press 1 to switch to your hands, aim at the ready mold and use LMB — Collect brick. The brick appears in your hands and the first hotbar slot gains a brick count. E HOLD — Pick up lifts the mold itself, so use the Collect brick prompt for this step.
Open full-size image ↗Ready · 1 brick → LMB Collect brick. The separate E HOLD Pick up prompt is for moving the mold. Place it on the current pyramid layer
Carry the brick to the pyramid and aim at a highlighted placeable space on the current layer. Use LMB — Place. The placed-brick counter at the top increases and the placement pays coins; the shown ground-layer mud brick pays 1 coin. Check the placed count to confirm the brick was used.
Open full-size image ↗The highlighted space is ready for LMB Place. The held-brick count falls when the brick is placed.
Success signal
A brick has left your hands and the pyramid’s placed-brick count has increased. The first-brick tutorial’s Place task is checked.
Troubleshooting
If the mold stays empty, refill the bowl at a riverbank clay pile and finish the 600 g fill. If it is still Drying, keep drying or wait for Ready. If E lifts the mold, switch to hands and use LMB Collect brick. If placement is unavailable, carry a brick and aim at a highlighted space on the current layer.
Sources
The controls, starter mold’s 600 g fill, Ready/Collect prompt and current-layer placement are visible in Zish Gaming’s full-game walkthrough. Its exact recording build is unshown. The 1-coin value is the shown ground-layer mud-brick example; payouts can depend on the brick and layer.